Manual Parting Surfaces

EXERCISE 1

In this exercise user will practice the following

• Creating a parting surface by using Extrude tool
• Creating a parting surface by using Flat tool
• Splitting the workpiece into two volumes using multiple parting surfaces
  

EXERCISE 2

In this exercise user will practice the following

• Creating a parting surface by using Revolve tool
  

Reference Part

Cavity

EXERCISE 3 

In this exercise user will practice the following

• Creating the parting surface using Copy Surface and Variable Section Sweep
• technique
• Splitting the workpiece into two volumes using multiple parting surfaces.
• Extracting components out of split volumes
  

Reference Part with Parting Surface

EXERCISE 4

In this exercise user will practice the following

• Analyzing the part with Draft Check tool to determine the suitable location of parting surface
• Filling the loops in a Copy surface
• Creating an Offset parting surface
• Creating the parting surface using
• Free Form technique
• Trimming a surface using edges of the reference part
• Merging the surfaces
• Splitting the workpiece into two
• volumes using multiple parting surfaces.
  

Reference Part

Core Half with Reference Part

Parting Surface and Reference Part

EXERCISE 5

In this exercise user will practice the following

• How to fill a cut that cannot be filled with regular Pro/MOLD tools
  

Reference Part

Cavity

EXERCISE 6

In this exercise user will practice the following

• Creating a revolved surface
• Creating parting surface interlocks
• Creating stripper ring for ejecting the part off the Core

Reference Part

Core Insert with Stripper Ring

Moving Half: Core Insert, Stripper Ring and Base Plate

Cavity Plate with Interlocks

Complete Mold

EXERCISE 7

In this exercise user will practice the following 

• How to create the local insert
• How to split a mold that requires a local insert

Reference Part

Cavity and Insert

EXERCISE 8

In this exercise user will practice the following 

•  How to reference pattern a parting surface
  

Reference Part

Core

EXERCISE 9

In this exercise user will practice the following 

• Creating a round workpiece
• Trimming a surface to desired size
• Transforming a surface
• Creating variable section sweep surfaces
• Merging the surfaces
• Patterning a parting surface
   

Axial Fan

Parting Surface and Reference Part

Core Half